Permit to Work Systems free essay sample

A permit-to-work system is a formal written system used to control certain types of work that are potentially hazardous. A permit-to-work is a document which specifies the work to be done and the precautions to be taken. Permits-to-work form an essential part of safe systems of work for many maintenance activities. They allow work to start only after safe procedures have been defined and they provide a clear record that all foreseeable hazards have been considered. A permit is needed when maintenance work can only be carried out if normal safeguards are dropped or when new hazards are introduced by the work. Examples are, entry into vessels, hot work and pipeline breaking. WHAT IS THE PROBLEM? An HSE survey showed that a third of all accidents in the chemical industry were maintenance-related, the largest single cause being a lack of, or deficiency in, permit-to-work systems. In a study of small and medium-sized chemical factories: I two-thirds of companies were not checking systems adequately; I two-thirds of permits did not adequately identify potential hazards; I nearly half dealt poorly with isolation of plant, electrical equipment, etc; I a third of permits were unclear on what personal protective clothing was needed; I a quarter of permits did not deal adequately with formal hand-back of plant once maintenance work had finished; I in many cases little thought had been given to permit form design. We will write a custom essay sample on Permit to Work Systems or any similar topic specifically for you Do Not WasteYour Time HIRE WRITER Only 13.90 / page While aimed primarily at the chemical industry the guidance provided may have application in other industries. 2 WHAT DO I NEED TO DO? Don’t assume that your system is a good one just because you have not yet had a serious accident. You should critically review your system and ask yourself the following questions. Information I Is the permit-to-work system fully documented, laying down: how the system works; the jobs it is to be used for; the responsibilities and training of those involved; and how to check its operation? I Is there clear identification of who may authorise particular jobs (and any limits to their authority)? I Is there clear identification of who is responsible for specifying the necessary precautions (eg isolation, emergency arrangements, etc)? I Is the permit form clearly laid out? I Does it avoid statements or questions which could be ambiguous or misleading? I Is it designed to allow for use in unusual circumstances? I Does it cover contractors? 3 Selection and training I Are those who issue permits sufficiently knowledgeable concerning the hazards and precautions associated with the plant and proposed work? Do they have the imagination and experience to ask enough ‘what if’ questions to enable them to identify all potential hazards? I Do staff and contractors fully understand the importance of the permit-to-work system and are they trained in its use? Description of the work I Does the permit clearly identify the work to be done and the associated hazards? I Can plans and diagrams be used to assist in the description of the work to be done, its location and limitations? I Is the plant adequately identified, eg by discrete number or tag to assist issuers and users in correctly taking out and following permits? I Is a detailed work method statement given for more complicated tasks? Hazards and precautions I Does the system require the removal of hazards and, where this is not reasonably practicable, effective control? Are the requirements of The Control of Substances Hazardous to Health Regulations 1999 (COSHH) and other relevant legislation known and followed by those who issue the permits? I Does the permit state the precautions that have been taken and those that are needed while work is in progress? For instance, are isolations specified and is it clear what personal protective equipment should be used? I Do the precautions cover residual hazards and those that might be introduced by the work, eg welding fume and vapour from cleaning solvents? 4 I Do the Confined Spaces Regulations 1997 apply? If so, has a full risk assessment identified the significant risks and identified alternative methods of working or necessary precautions? Procedures I Does the permit contain clear rules about how the job should be controlled or abandoned in the case of an emergency? I Does the permit have a hand-back procedure incorporating statements that the maintenance work has finished and that the plant has been returned to production staff in